How to overcome the slow troubleshooting pc
Some things that must be taken to respond to problems "that slow computer!"
1. Viruses and spyware is one of the causes of the slow pc, because the most easily menyusupi and many users who interact with it, spyware can be used to bring from users or from the banners and banner-ads on a web page that when we start off access pages / banners through a browser that has the grip of security that is not good, so that spyware is very close to IE.
Some ways to remove spyware:
a. Identify and analysis process that is running with the windows
Task manager.
b. Identification and non-activate the service through
management console.
c. Identification and non-activate the service on the startup items with the system
configuration utility.
d. Find and delete the entry in the registry, which is in the startup.
e. Identify and remove the file suspicious.
f. Install and use spyware detection and removal.
2. Processor around. Most processors easily generate heat, so that requires a special refrigerator and a special type of fan, so when the temperature exceeds the increased processor, the system will be slowed and the process will be slow. Processor fan that failed due to:
1. Dust that the fan rotation Smooth.
2. Fan motor damaged.
3. Bearing fan, so there is a fan dOLL "jiggling."
Jiggling is if the fan is rotating there is noise krek-krek quickly due to have started bearing fan dOLL.
3. Ram that bad. Some situations can also because of the bad influence of ram, this
due by:
1. RAM timing later than the optimum specification engine.
2. RAM has a value of the minor can only be seen through after some test.
3. RAM is too hot.
4. The hard disk file. If the hard disk often experience failure, this will also aggravate the performance of the computer, and type of file this is the cause, nature can be mechanical, electronic, even firmwarenya not update, this will cause a hard disk:
1. Access time is slow.
2. The number of bad sectors rising in the scandisk.
3. There bluescreen not terjelaskan.
4. Boot failed.
5. BIOS Settings. Usually, the BIOS settings are not dicustom will be slowing the process a few seconds, especially when booting, for that we must mengcustom BIOS settings so that the work performance of the boot process can be accelerated, in general, setting the BIOS that must be considered are:
1. Boot directly to the hard disk.
2. Disable the IDE drive is not used.
3. Set the speed of RAM latency.
4. Turn off the IO / IRQ onboard device that is not used.
5. Use Fast POST.
6. Disk type / controller compatibility. Usually the motherboard now have kontroler good for the parallel ATA disk, but we must consider it an IDE cable, because cable has some certain specifications, there is a udma 33, 66, and 100, if we see a physical, has a fibrous cord of a many fine and smooth, while the udma 33 serabutnya little, so use the cable that has a high specification for the disk us.
7. Windows Services, some of the service must be turned off and if we do not membutuhkanya is:
1. FTP 2. Indexing Service
2. Remote Registry
3. Telnet
4. Remote Access
5. Remote Desktop
6. Automatic Update
8. Process the invisible. Sometimes, we know there are no programs that run only
in memory, when we have not even use it again or we have menguninstallnya program, but there is still running, for that we must consider the process what is happening in the computer we see the task manager, and we can end taskkan or kill, and we can remove. exe it.
9. Disk Fragmentation As the characteristics of the file in a computer must have a process in the file add, in the edit, or remove, it can cause fragmentation in some areas hard disk sector, for that we need to fix the data in the computer, namely the mendefragnya. if we use Windows XP, we can use defrag.exe and meletakannya in the schedule to be running at the time that we set.
2 comments:
tambah terus artikelnya,,
jangan lupa cantumkan sumber dari artikelnya.
udah bagus,,,
tolong ditambah lagi artikelnya ya........
Post a Comment